Model 300 OEM Chassis Drive
This compact, 3 amps DC drive is designed to fit directly into a machine control panel by a single fixing point. Simple installation and very small size are of great benefit to OEM's where space is limited.
- Built-in speed potentiometer and dial
- Maximum and minimum speed settings
- Current limit
- Suitable 110 or 230 volts, single phase, 50 or 60Hz configurable
- For use with permanent magnet motors: 1/4hp at 90V, 1/2hp at 180V
Dimensions: 3.4"H x 3.4"W x 1.5"D (86 x 86 x 36 mm)
Approvals: CE
|
Model 300 |
|
Model 370 OEM Chassis Drive
This general purpose, 3.7 amps DC drive comes with numerous valuable features:
- Armature voltage or tach feedback with IR compensation
- Adjustable max & min speed, current limit acceleration ramp
- Power fuse
- Power on indicator
- Dual supply voltage 110 / 230 VAC, 50 or 60Hz
- For shunt wound or permanent magnet motors
- 1/3hp at 90V, or 1/2hp at 180V armatures
Dimensions: 4"H x 4"W x 1.6"D (100 x 100 x 40mm)
Approvals: CE
|
Model 370 |
|
Models 400, 800, 1200 & 1600 DC Drives (up to 3hp)
| Model |
230VAC,180V Arm |
110VAC,90V Arm |
| 400 (4 amps) |
0.75hp |
0.38hp |
| 800 (8 amps) |
1.5hp |
0.75hp |
| 1200 (12 amps) |
2.0hp |
1.0hp |
| 1600 (16 amps) |
3.0hp |
1.5hp |
Standard Features:
- Linear torque control
- Armature voltage or tach feedback with IR compensation
- Calibration range switches (no component changes)
- Speed reference 0-10V or 4-20mA
- Maximum and minimum speed settings
- Adjustable current limit
- Independently adjustable up and down ramps
- 150% overload capacity with 30 second stall timer
- Stall and Zero Speed relay driver outputs
- Power fuse (up to 12 amps)
- Power on and stall indicator LEDs
- Stability adjustment
- Speed, Ramp Speed and Current signal outputs
- International supply voltages 110 / 230 VAC, 50/60hz
- Suitable for shunt wound or permanent magnet motors
Dimensions:
- Model 400: 5.2"H x 4.0"W x 1.6"D (130 x 100 x 40mm)
- Model 800: 5.2"H x 4.0"W x 2.8"D (130 x 100 x 70mm)
- Model 1200: 5.2"H x 4.0"W x 2.8"D (130 x 100 x 70mm)
- Model 1600: 6.1"H x 6.1"W x 3.4"D (150 x 150 x 85mm)
Approvals: CE, CSA
(See Enclosed Drives for NEMA 1 enclosed versions with Dynamic Braking and Reversing options)
|
Model 400/800/1200
See Enclosed Version |
