Model 3600XRi Regen Systems Drive
 Model 3600XRi |
This 4-quadrant, fully regenerative, reversing, single phase, DC drive is probably the most advanced product of its type on the market. It is a compact, full featured, high performance product with isolated control circuits, designed for either stand alone or integrated systems applications.
A drive.web online system builder option (available May 2004) uses Ethernet to enable these drives to be integrated into cost effective systems of any size or complexity. The drive.web option can be easily added retrospectively to any installation to provide improved functionality, connectivity, diagnostics and Internet access.
The 3600XRi is designed to meet the most demanding of small process line drive applications where both loads and speeds vary in each direction.
Quality and reliability are assured by the use of advanced manufacturing and testing technologies.
Standard Models
| Model | 230VAC, 180V Arm | 110VAC, 90V Arm | Dimensions Inches (mm) |
Fuse Kit Part Number |
| 3600XRi/16 | 3hp | 1.5hp | 6.9x8.0x3.2 (175x200x80) | F3-30 |
| 3600XRi/32 | 6hp | 3hp | 6.9x8.0x3.2 (175x200x80) | F3-60 |
| 3600XRi/36 | 7.5hp | 6.9x8.0x3.8 (175x200x95) | F3-60 |
High-Voltage Versions
| Model | 415VAC, 320V Arm | 240VAC, 180V Arm | Dimensions Inches (mm) |
Fuse Kit Part Number |
| 3600XRi/32LL | 7.5hp | 6hp | 6.9x8.0x3.2 (175x200x80) | F3-60 |
| Model | 480VAC, 360V Arm | 240VAC, 180V Arm | Dimensions Inches (mm) |
Fuse Kit Part Number |
| 3600XRi/36 | 10hp | 6hp | 6.9x8.0x3.8 (175x200x95) | F3-60 |
Standard features:
- Linear torque control
- Armature voltage or tach feedback
- Calibration range switches (no component changes)
- Speed reference +/-10V or 4-20mA
- Speed trim input
- Maximum and minimum speed settings
- Independently adjustable up & down ramps in both directions
- Adjustable current limit
- Current range switch selectable
- Torque control in either 2 or 4 quadrants
- 150% overload capacity with 30 second stall timer
- Relay outputs:
- Stall
- Zero speed
- Reverse
- Overload
- Control fuses fitted
- Fast or ramped stop
- Start inhibit after power loss
- LED indicators for + current, - current, stall & stall timer
- Speed signal output
- Current signal output
- Ramp signal output
- Total demand signal output
- Dual supply voltage 110 / 230 VAC, 50/60Hz
- Suitable for shunt wound or permanent magnet motors
- IR compensation
- Stability adjustment
- Pushbutton inputs for:
- Forward
- Reverse
- Stop
- Start
- Jog
Approvals: CE, CSA
Enclosed wall mounting versions of these drives and a wide range of other options are detailed in the Modulus Drive Units section.
